|
| Go Back |
|
 |
 |
 |
 |
 |
 |
|||||
 |
|
|
|
|
|
||||||
|
Egg Box CLB100-180P&S ELB100-180G |
|
250 x 250mm spacing 250mm deep. |
|
350 x 350mm spacing 250mm deep. Support trolley required. |
|
350 x 250mm spacing 300mm deep. Support trolley required. View Image |
|
250 x 250mm spacing 30mm deep. |
|
CLB100-300P CLB100-300S ELB100-300S |
|
|
|
|
|
|
|
|||||
|
Tubular |
|
300 x 300mm spacing |
|
600 x 600mm spacing |
|
600 x 600mm spacing 250mm deep. |
|
600 x 600mm spacing 1000mm deep. |
|
Use joint brace parts for joining tubes. |
|
|
|
|
|
|
|
|||||
|
Omega foam filled laminate. Refer to ACG Technical Centre. FB101 |
|
200mm spacing |
|
In conjunction with other support structures. |
|
In conjunction with other backing structures. |
|
In conjunction with other backing structures. |
|
Over laminated with tool skin prepregs. |
|
|||||||||||
 |
Use ACC Silicones Ltd - Silcoset 153 to bond backing structure to tool skin and itself | ||||||||||
 |
|||||||||||
| Refer to the above, thicker tool skins and header boards. Also, closer spacing may be required. Contact ACG's Technical Centre. |
|
Use ACC Silicones Ltd - Silcoset 153 generally and LS416 off component area of tool skin. |
