Archived Tooling Sector News - 2009

Editors - please refer to the Notes to Editors for background information on Umeco plc and its operating divisions.

ACG Announces the Lauch of a New Composite Tooling Block- November 2009

Other News	2008
Tooling

ACG Announces the Launch of a New Composite Tooling Block - 16th November 2009

Advanced Composites Group Ltd (ACG), part of the Composites Division of Umeco plc, announces the launch of CB1100, a high-grade ceramic tooling block material offering a unique combination of high temperature resistance and exceptionally low coefficient of thermal expansion (CTE). Fully compatible with ACG’s LTM® epoxy and HTM® Bismaleimide (BMI) prepregs, CB1100 can produce thermally stable composite tooling capable of withstanding the high pressures and elevated temperatures associated with autoclave cure cycles.

ACG’s CB1100 ceramic tooling block can be used as a high temperature capable master model. Machining times for CB1100 are short and, because of its very low thermal expansion, CB1100 is also particularly suited to the production of high accuracy, short run and prototype tooling, where it offers great savings in time and cost.

BMI tooling produced with a CB1100 core can be produced direct from the block without the need for a high temperature capable intermediate. CB1100 blocks can be fabricated and machined to form a tool core, totally eliminating the need for a master model, thereby further reducing lead times and costs. The composite tool skin, laminated directly to the core, uses ACG’s patent pending interfacing technology. Due to the high thermal stability of the ceramic core, the tool skin can be cured in a single operation without the need for an initial low temperature cure and then followed by a subsequent free-standing, high temperature post-cure. The carbon tool skin is fully supported by the ceramic core so there is no need for a backing structure. Collectively, this leads to further reductions in both time and material costs. The tool face is CNC-machined to create the final surface profile, thus overcoming accuracy issues created by intrinsic laminate shrinkage, resulting in an exceptionally accurate and stable tool.

CB1100 does not absorb water so it does not require drying or subsequent venting of the tool, and it is incombustible.

Images © copyright: 2009 ACG Ltd.

For further information please contact:

Advanced Composites Group
Clive Bennett - Tooling Technology Manager. E-mail: cbennett@acg.co.uk
Xavier Gambert - Aerospace Sector Manager. E-mail: xgambert@acg.co.uk
Telephone: +44 (0)1773 766204

Go to Top

Other News	2008
Tooling